Possible issues that can happen to your timber pt2
It is not often, but sometimes we find marks made from a DIY project.
In order to assist, we’ll highlight some possible issues and how to fix them.
Number 1: Drum machine marks.
Whenever a belt/ drum sander is used you need to be careful to lift the sander at the end of each run to blend in the start and ends.
Otherwise where ever the drum stops, an additional divot will be made. And it shoes in the final results.
Number 2: Not sanding deep enough
In order to get an even finish, you need to sand as much as possible. Any existing blemish, un-removed sealant, deep scratches, dents, will be visible in the final. And even worse, will prevent the new finish from bonding to the polished timber.
So to prevent that, try to sand as much as possible with the correct sanding tool, such as a drum sander and edge sanders.
If there is any additional questions or concerns please feel free to contact us at email@example.com or just fill out our online quote form found below if there is an upcoming project that you would like some advice on. We'll try our best to help out as much as we can.
Good luck on your upcoming project!